Home / Stahlwille 98VA/294QR 294 Piece Professional Tool Kit in 6 Drawer TTS98VA Roller Cabinet
  • Stahlwille 98VA/294QR 294 Piece Professional Tool Kit in 6 Drawer TTS98VA Roller Cabinet
  • Stahlwille 98VA/294QR 294 Piece Professional Tool Kit in 6 Drawer TTS98VA Roller Cabinet

Stahlwille 98VA/294QR 294 Piece Professional Tool Kit in 6 Drawer TTS98VA Roller Cabinet

Quantity
ADD TO CART
BUY IT NOW
  • Detail
    • Set of tools with Tool Trolley No. 98VA/294QR
    • 100% increased drawer volume compared to 90, 95 and 95VA
    • Tool trolley with three-stage safety logic:
    • central locking with a cylinder lock and fold-down key
    • individual locks prevent inadvertent opening in transit
    • topple-proof – it is not possible to pull out more than one drawer at a time
    • Drawer identification by several stickers per drawer (sheet with stickers included in delivery)
    • Stainless steel handle with reinforced connection to body
    • Impact protection strips with wrap-around bumper
    • Particularly tough, oil and skydrol resistant worktop made of ABS with compartments for small components
    • Oil and acid resistant low-friction wheels (D.125 mm) with carpet protection to prevent ingress of dirt and fibres into bearings, with two parking brakes
    • Paper-roll holder
    • STAHLWILLE green, drawers in two colours (silver with black full-width handle)
    • Perforations from both sides for hooks No 8031-8041, e.g. for larger tools
    • Can be enhanced with STAHLWILLE Standard and TCS inlays
    • Contents: 294-piece:
    • 1 workshop trolley 98/VA6 A + torque wrench no. 721QR/20 QUICK
    • 97830146 818/4
    • 1 QuickRelease extensions No. 405QR/2 6.3 mm (1/4″) L.54mm
    • 1 QuickRelease extensions No. 405QR/4 6,3 mm (1/4″) L.100mm
    • 1 Bit holder No. 412 6,3mm (1/4″) inner square 6,3mm (1/4″) L.25mm
    • 1 universal joint No. 407QR 6,3mm (1/4″) L.54mm
    • 2 sockets No.40 TX 1/4″ E7 | E8
    • 1 socket handle No. 400QR, 1/4″ L.150mm 2K handle
    • 10 sockets 6,3 mm (1/4″) No.40 hexagon SW 5 | 5,5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 mm
    • 8 screwdriver bits 1/4″ for internal TORX® screws No.44 KTXB | T8 | T10 | T15 | T20 | T25 | T27 | T30 | T40
    • 5 INHEX sockets 1/4″ for hexagon socket screws No.44 K: SW 3 | 4 | 5 | 6 | 8 mm
    • 1 reversible ratchet No.415QR N with QuickRelease, 1/4″ RSW4,5° L.117mm
    • 1 cross handle with slide No.404QR 1/4″ L.116mm
    • 1 Reducer No.513, 1/2 to 3/8″ L.35mm
    • 1 socket extensions No.527QR/10 with QuickRelease, 3/8″ L.240mm
    • 1 QuickRelease fine tooth ratchet No.435QR N 10mm (3/8″) RSW4,5° L.193mm
    • 1 Cross handle with slide No.425QR N 3/8″ L.165mm · 1 universal joint 3/8″ No.428 L.46mm
    • 1 reducer No.431, 3/8 to 1/4″ L.28mm
    • 1 socket extension No.427QR/3 6,3 mm (1/4″) L.76 mm · 15 sockets 3/8″ with hexagon No.456: 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 mm
    • 4 sockets no.45 TX 3/8″ SW E8 | E10 | E12 | E14
    • 2 Screwdriver sockets for internal TORX® screws No.49 TX 3/8″ T25 | T45
    • 3 Screwdriver bits for INHEX screws No.49 3/8″ SW 5 | 6 | 8mm
    • 4 Screwdriver bits for internal TORX® screws No.1054TX/2054TX 1/2″ T40 | T45 | T50 | T55
    • 2 Screwdriver bits for INHEX screws No.54 1/2″ SW 10 | 12mm
    • 4 screwdriver bits for internal TORX® screws No.54 TX 1/2″ T40 | T50 | T55 | T60
    • 1 reversible ratchet No.512QR N with QuickRelease, 1/2″ RSW4.5° L.265.5mm
    • 1 cross handle w.sliding piece Nr.506QR 1/2″ L.300mm
    • 1 socket extensions Nr.509QR/10 with QuickRelease, 1/2″ L.255mm
    • 1 universal joint 1/2″ No.510QR L.80mm
    • 1 socket extensions No.509QR/5 with QuickRelease, 1/2″ L.130mm
    • 17 sockets 12,5 mm (1/2″) No.52 hexagon SW 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 24 | 27 | 30 | 32 mm
    • 1 enlarger No.432, 3/8 to 1/2″ L.31mm
    • 1 offset screwdriver No.10760 CV 7 for INHEX screws SW 7mm
    • 15 ratchet combination wrench OPEN-RATCH No.17 SW 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 21 | 22 | 24mm
    • 1 socket wrench extension No.509/5 IMP 12,5 mm (1/2″) L.130mm
    • 11 IMPACT sockets No.50 IMP 1/2″ SW 8 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19mm
    • 8 IMPACT sockets No.51 IMP 1/2″ long SW 13 | 15 | 16 | 17 | 19 | 21 | 24 | 27mm
    • 4 IMPACT sockets No.2309 1/2″ long slim SW 17 | 19 | 21 | 22 mm
    • 1 ball joint piece No.510 IMP 1/2″ L.52mm
    • 1 telescopic hollow mirror No.13120N L.310-750mm
    • 1 telescopic stainless steel mirror No.12921M mirror d.32mm L.171-699mm
    • 2 nut splitters No.12615 for nuts SW 10-18 | 19-27mm
    • 1 release lever No.12770-2K N L.260mm
    • 1 release lever No.12770/2 L.185mm
    • 1 Socket No.1062 1/2″ SW 27mm for injectors
    • 1 VDE power side cutter No.6602, L.160mm
    • 1 combination pliers No.6501, L.180mm 2K-handle
    • 1 VDE flat nose pliers No.6529, L.200 mm 2K-handle
    • 1 water pump pliers No.6551, L.240mm adjustable 7x jaw opening max.34 mm
    • 1 cable knife No.12320 blade L.90 mm stainless steel
    • 1 plastic lever No.12770 3 L.300mm
    • 1 caliper no.12900N, measuring range 150 mm
    • 1 rolling tape measure No.12935/3 tape l.3m w.locking device
    • 5 slotted screwdrivers DRALL+ No.4621: 0,4×2,5×80, 0,5×3,5×90 | 0,6×4,0x100 | 1×6,5X140 | 1,2×8,0X160mm
    • 2 Phillips screwdriver DRALL+ No.4631 PH1 | PH2 long 2K handle
    • 3 Phillips screwdrivers DRALL+ No.4632 PH1 | PH2 | PH3 2K handle
    • 1 slotted screwdriver DRALL No.4724 0,6×3,5mm
    • 1 Phillips screwdriver DRALL+ No.4734, PH2 L.25mm 1K-handle
    • 1 Screwdriver No.10506 0,8×4,0x300 L.350mm
    • 1 Screwdriver No.10518 1,0×5,5×410 L.525mm
    • 1 magnetic lifter No.12600, tractive force 500g L.500mm
    • 1 claw gripper No.12922E L.540mm
    • 96830213TCS 13/240/21/6
    • 21 Combination wrenches OPEN-BOX No. 13: SW 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 21 | 22 | 24 | 27 | 30 | 32 | 34 mm
    • 6 ratchet wrenches Fastratch no. 240 SW 8-5/16 | 10-3/8 | 13-1/2 | 14-9/16 | 17-21/32 | 19-3/4 · 96830214 TCS KABELEX
    • 6 unlocking tools KABELEX® No. 1553 | 1556 | 1559 | 1562 | 1574 | 1591
    • 3 extraction tools No. 1501+1511 | 1502+1512 | 1503+1513
    • 1 wire stripping knife with hook blade No. 12697
    • 1 LED flashlight No. 13128
    • 5 HSS high performance twist drills (3.2 | 4.8 | 6.4 | 8 | 8.7 mm)
    • 5 special steel unscrewing pins size 1-5 for threads M5-M16
    • 5 unscrewing nuts size 1-5 · 10 drill bushes size 1-10
    • 1 soft-face hammer No.10959 35 D.35mm L.335mm
    • 1 locksmith’s hammer No.10961 500g with ash handle
    • 1 hose clamp pliers CLIC No.10615/1 L.200 mm
    • 6830215 TCS 12171/12174 VDE
    • 14 VDE Sockets 10 mm (3/8″) No. 12171 VDE Double hexagon SW 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 16 | 18 | 19 | 20 | 22 mm
    • 5 VDE Sockets 10 mm (3/8″) No. 12174 VDE TORX® T20 | T25 | T30 | T40 | T45
    • 3 VDE Socket extensions 10 mm (3/8″) No. 12167 VDE Gr. 3 | 6 | 10 · 96830216 TCS 4798 VDE
    • 1x 2-component handle
    • 1x clip-on rotating cap
    • Slotted screwdriver size 2.5 x 0.4 | 3.0 x 0.5 | 3.5 x 0.6 | 4.0 x 0.8 | 5.5 x 1.0 | 6.5 x 1.2 mm
    • Phillips screwdriver PH1 | PH2
    • Phillips screwdriver PZ2
    • TORX® screwdriver T10 | T15 | T20
    • 1 VDE combination pliers no. 6501, L.180 mm 2K handle
    • 1 VDE Flat nose pliers No.6530 5 L.200 mm
    • 1 VDE Side cutters No.6600 5 160, L.160mm 2K-handle
    • 1 VDE Stripping pliers No.6623, L.160 mm
    • 1 VDE cable knife No.12188 blade L.40mm
    • 1 Self-clamping VDE insulating cable-end cap No. 12194 D.10mm
    • 1 Self-clamping VDE insulating cable-end cap No. 12194 D.20mm
BACK